Commercial flooring takes more punishment per square metre than almost any other building surface. Foot traffic, wheeled equipment, chemical spills, and seasonal tracked-in grit work against the finish and the substrate simultaneously. Without a structured maintenance program, floors degrade faster than they should — and replacement is exponentially more expensive than proper care.
Allcare Maintenance Services provides commercial floor care services for facilities across the Greater Toronto Area. The program covers the full range of commercial floor types: VCT, vinyl plank, linoleum, ceramic tile, porcelain, and polished concrete. Dedicated floor crews work separately from general cleaning teams. Equipment is not shared. Work is scheduled after hours.
The Allcare Floor Care Approach
Floor care at the commercial level requires more than a mop and a bucket. It requires the right equipment for each floor type, the right product chemistry, dedicated crews who are not cross-utilized on general cleaning, and a maintenance schedule built around your facility’s traffic patterns and capital preservation goals.
Floor Care
Allcare operates dedicated floor care crews. They are not the same crews doing janitorial work in the same building. Floor equipment — walk-behind scrubbers, ride-on scrubbers, and high-speed scrubbing machines, — is not shared with general cleaning teams.
All floor care work follows NFSI standards. Wet floor signage is mandatory during and after any floor work. Slip-and-fall incidents related to floor care are a facility liability. Allcare’s safety protocols are not negotiable.
Work is scheduled after hours. Most commercial floor care is incompatible with occupied spaces — not just because of disruption, but because wet floors present a safety risk and the work requires moving equipment through spaces that must be clear. Your account manager will coordinate timing with your operations team.
For facilities requiring floor care alongside other building services, Allcare also provides janitorial services, carpet cleaning, window cleaning, and full building maintenance services.
“Great people to work with. Very knowledgeable regarding our cleaning and maintenance requirements.
George GTA commercial facility client
★★★★★
A GTA printing operation called Allcare after removing a large press from their facility. The new press was scheduled for installation the next day, and the epoxy floor area where the old equipment had sat needed to be scrubbed clean before the new machinery could go in. Allcare assigned a crew that evening. The floor was ready by morning.
Allcare has served GTA commercial facilities since 1993. With 40+ active crews and a client base spanning 300+ buildings, the operational capacity exists to handle floor care programmes at scale — from a single-location office to a multi-building property portfolio.
For facilities requiring floor care alongside other building services, Allcare also provides janitorial services, carpet cleaning, window cleaning, and full building maintenance services.
See the full commercial cleaning services overview.
VCT Strip and Wax
Vinyl composite tile (VCT) is one of the most common commercial floor surfaces in GTA facilities — warehouse offices, school corridors, healthcare settings, retail back-of-house, and institutional buildings. VCT requires a protective finish to maintain its appearance and protect the tile from below-surface wear.
VCT Strip & Wax
Over time, that finish accumulates layers. Old wax yellows, traps grit, and loses its reflective quality. When that happens, stripping and rewaxing is the correct approach.
The strip process: A chemical stripper is applied to the VCT surface and allowed to dwell. The stripper breaks down the old wax layers. Allcare uses a floor machine to mechanically agitate and lift the old finish. The floor is then thoroughly rinsed, neutralized and allowed to dry before new product is applied.
The wax application: Finish coats are applied in multiple thin layers, allowing each coat to dry before the next is applied. Thin-coat application produces a harder, more durable finish than a single heavy coat. Allcare’s floor crews apply a minimum of three to five finish coats depending on the facility type and foot traffic load.
When to strip and wax: Most VCT commercial floors benefit from a full strip-and-wax cycle one to two times per year. High-traffic areas may require more frequent attention. Between full cycles, buffing and recoating extends the life of the finish.
Tile and Grout Cleaning
Ceramic and porcelain tile is durable but grout is not. Grout lines are porous. They absorb oils, food residue, mop water contamination, and biological material. Standard mopping distributes dirty water into grout lines rather than removing what is already there.
Grout Cleaning
Allcare’s tile and grout cleaning uses:
- Steam cleaning for heavy grout soiling and sanitization requirements (medical environments, food-adjacent spaces)
- Grout-specific cleaning machines with rotating brush heads that apply cleaning agent directly into the grout channel
- Targeted chemical agents matched to the soil type and grout colour
After cleaning, grout sealing is recommended for high-traffic or high-moisture areas. Sealed grout resists future absorption and is significantly easier to maintain.
Grout cleaning is scheduled after hours and requires a drying period before the area is opened to foot traffic. Your account manager will confirm timing with your facility team.
Polished Concrete
Polished Concrete Maintenance
Polished concrete has become a standard finish in GTA commercial, retail, and industrial facilities. It is durable and lower-maintenance than coated floors, but it is not maintenance-free. Polished concrete requires:
- Regular dust mopping to prevent grit from scratching the polished surface
- Periodic wet cleaning with a pH-balanced cleaner specifically formulated for polished concrete
Using alkaline or acidic cleaners on polished concrete etches the surface over time. The correct pH range for polished concrete maintenance is near-neutral (pH 7 to 9). Allcare’s floor crews use products within the appropriate pH range and do not substitute general-purpose floor cleaners.
gTA multi-site commercial client
★★★★★
“Great company to deal with. They take care of both of our buildings in the GTA from regular daily cleaning, deep cleaning when needed, office carpet cleaning, warehouse floors swept and scrubbed, a one stop shop for all of our needs. Very reliable, have been dealing with Corinne for years.”
Areas Served
Floor care services are available across the Greater Toronto Area, with dedicated floor crews operating separately from general cleaning teams. After-hours scheduling applies across all GTA service areas.
Service Areas
- Aurora
- Ajax
- Bolton
- Bradford
- Brampton
- Burlington
- Caledon
- Concord
- Etobicoke
- Georgetown
- Gormley
- Halton Hills
- Hamilton
- Innisfil
- King City
- Markham
- Milton
- Newmarket
- Oakville
- Oshawa
- Pickering
- Richmond Hill
- Scarborough
- Whitchurch-Stouffville
- Woodbridge / Kleinburg
- Whitby
our services
Related Commercial Cleaning Services
The floor care maintenance program works alongside ongoing janitorial services. Routine cleaning handles the daily upkeep; floor care handles the stripping, waxing, and refinishing cycles that daily cleaning cannot address. Facilities with significant carpeted areas typically add carpet cleaning to the same schedule.
Janitorial Services
Full-facility cleaning programs for offices and commercial facilities.
Office Cleaning
Before hours, after hours, or daytime coverage to fit your operations.
Commercial Carpet Cleaning
Extraction and scheduled maintenance programs.
Post-Construction Cleaning
Three-phase rough, light, and final clean.
Commercial Window Cleaning
Exterior up to two storeys via water-fed pole system; full interior glass cleaning.
Day Porter Services
On-site coverage during your business hours for continuous presentation upkeep.
Floor Care and Strip/Wax
VCT stripping and waxing, burnishing, grout care, and polished concrete maintenance.
Green Cleaning
Rochester Midland Canada Enviro Care program, EcoLogo and Green Seal certified.
Industrial Cleaning
Site-specific, high-spec cleaning for manufacturing and
industrial environments.
Laboratory Cleaning
Pharmaceutical and lab-grade cleaning to GMP standards.
What GTA Clients Say
★★★★★ 4.9 from 23 Google Reviews.
See Our Google Business Profile.
Reviews
CF&R Services has been working with Allcare since April 2007, and over nearly 20 years they have consistently provided us with reliable and professional service.
The Allcare team has always been responsive to our needs, and we truly value the long-standing relationship we have built with them.
A special mention to Suresh, who does an excellent job looking after our facility. He is dependable, hardworking and takes pride in his work. His efforts are very much appreciated by our team.
We would happily recommend Allcare to other businesses looking for a dependable and professional service provider.
The Allcare team has always been responsive to our needs, and we truly value the long-standing relationship we have built with them.
A special mention to Suresh, who does an excellent job looking after our facility. He is dependable, hardworking and takes pride in his work. His efforts are very much appreciated by our team.
We would happily recommend Allcare to other businesses looking for a dependable and professional service provider.
Our company has used Allcare for 10 plus years and always been very happy with their service. The cleaning is done to a very high standard and this is noticed and appreciated by our employees.
The team at Allcare is amazing! They've been doing our weekly cleaning for years now and have always done a thorough job to make sure our office space is in top shape. Great communication and always available for us if we have any questions or special requests.
We have used AllCare a couple of times, and they have done a phenomenal job cleaning our carpets as well as general building cleaning!
Allcare has been cleaning our facility in Brampton for a long time and they always do a great job. Highly recommend.
Frequently Asked Questions
FAQs
- How often does VCT flooring need to be stripped and waxed?
Most commercial VCT floors benefit from a full strip-and-wax cycle one to two times per year. High-traffic areas may require more frequent cycles. Between full strip-and-wax services, regular burnishing and maintenance mopping extend the life of the finish and reduce the frequency of full cycles.
- What floor types does Allcare's commercial floor care programme cover?
Allcare handles VCT and vinyl (strip-and-wax, buffing), linoleum (scrubbing), ceramic and porcelain tile (including grout cleaning and sealing), and polished concrete (pH-balanced maintenance and buffing). Scope is assessed during the facility walkthrough.
- Why does floor care need to be done after hours?
Floor care equipment — scrubbers, floor machines, and wet cleaning systems — cannot operate safely in occupied spaces. Wet floors create slip hazards. The equipment requires clear floor paths to operate effectively. After-hours scheduling is standard practice for all Allcare floor care work.
Schedule a Floor Assessment
A floor assessment is part of any Allcare facility walkthrough. The assessment identifies floor types, current finish condition, and the appropriate program for each area. It is included at no charge.
Contact Us
